Your cart is empty.
netDIMM netX based DIMM-PC module
End of Life
- netX500 with ARM 926EJ-S / 200MHz / 32/64MB SDRAM / 16/32MB Flash
- USB, UART, SPI Interfaces
- Ios or Extension Bus for CompactFlash
- 2 Real-Time ports with Switch and Hub Ethernet/IP, EtherCAT, SERCOS III, Powerlink, PROFINET
- Fieldbus Controller CANopen, DeviceNet, PROFIBUS / MPI
- Board Support Packages for WinCE, Linux, VxWorks, rcX Real-Time-Kernel
- Standard DIMM-PC Dimensions
- Evaluation Starter Board available
CALL FOR PRICE
Image for illustrative purposes only
Description
The netDIMM is industrial communication technology with the network controller netX. The easy solution to build up devices of automation with fieldbus technology and Real-Time-Ethernet. netDIMM module comes with memory, osc, reset and dc/dc converter.
Specification
| Technical Data | NDCM 500-HMI |
|---|---|
| LCD Controller | 640x480, 16-Bit Colour TFT/STN, Touch |
| Interfaces | USB 1.1, SPI, 3x UART or 16x GPIO, JTAG |
| AD-Converter | 2 Channels, 10-Bit, 1MS/s S&H |
| 2 Ethernet Ports | 10BASE-T/100BASE-TX, Integrated PHYs, IEEE1588. EtherCAT with 3 FMMUs and 4 SyncManager. Ethernet/IP. Powerlink, Integrated Hub, Response Delay max 1uS. PROFINET, integrated Switch |
| Fieldbus Controller | CANopen, DeviceNet, PROFIBUS |
| Extension | Dual-Port Memory, Extension Bus or 52 x IO |
| Dimensions (in mm) | 67.6 x 40 |
| Power Consumption | 600mA @ 3.3V |
| Processor | netX 500 with 200MHz ARM 926EJ-S |
| Memory | 16/32MB Flash, 32/64MB SDRAM, 512kB SRAM, buffered internally |
| Operating Temperature | -25ºC - 55ºC |
Protocols
| Primary | Secondary |
|---|
Accessories
| Product Name | Brief Description |
|---|
Downloads
- netDIMM
Product Datasheet