Your cart is empty.
NT 100-CO-CO Gateway Protocol Converter CANopen to CANopen
Gateway CANopen/CANopen
- Fieldbus to Fieldbus
- Master or Slave to Master or Slave
- FDT/DTM Configuration Tool SYCON.net
- Configuration and Diagnostic via USB
- SD Card to save and restore configuration
£726.49
Image for illustrative purposes only
Description
The netTAP uses the netX network controller to provide a low-cost and easy solution for different protocol conversions. The different interfaces are combined modularly in a compact housing. Firmware is loaded via USB to suit the required protocol.
Specification
| EtherCAT | Slave 400 Byte I/O |
|---|---|
| SERCOS-III | Slave 396 Byte I/O |
| Ethernet/IP | Master 11520 Byte I/O, Slave 1008 Byte I/O |
| PROFINET-IO | Slave 2048 Byte I/O |
| Product | NT 100-CO-CO |
| Description | Gateway CANopen / CANopen |
| Display | Link, Rx/Tx, SYS, COM, Protocol specific |
| Possible Implementation | CANopen Slave to PROFIBUS-DP Master, CANopen Slave to CANopen Slave |
| Diagnostic Interface | Mini USB |
| Configuration | SYCON.net |
| Operating Voltage | 18 - 30 V / 130 mA at 24 V |
| Plug Connector | Mini COMBICON 2-pole |
| netSCRIPT | Master 2048 Byte I/O, Slave 2048 Byte I/O |
| Dimensions (without connector) | 100 x 52 x 70 mm |
| Mounting | On top-hat rail DIN EN 60715 |
| Weight | 150g approx. |
| CE Sign | Yes |
| Emissions | CISPR 11 Class A |
| Noise Immunity | EN 61131-2: 2003 |
| Protocol | Cyclic Data |
| ASCII | Master 2024 Byte I/O, Slave 2024 Byte I/O |
| Operating Temperature | 0 - 60°C |
| CANopen | Master 7168 Byte I/O, Slave 1024 Byte I/O |
| DeviceNet | Master 7168 Byte I/O, Slave 510 Byte I/O |
| PROFIBUS | Master 7168 Byte I/O, Slave 488 Byte I/O |
Protocols
| Primary | Secondary |
|---|---|
| CANopen Slave | CANopen Master |
| CANopen Master | CANopen Slave |
| CANopen Slave | CANopen Slave |
Accessories
| Product Name | Brief Description | |
|---|---|---|
| NXLIC-MASTER | Master License | view details |
Downloads
- netTAP100
Product Datasheet 10-2022