Your cart is empty.
NT 50-DN-RS Gateway Protocol Converter DeviceNet to Serial
RS232/422/485 to DeviceNet
- Cost optimized, compact design
- 1 port Serial to Fieldbus
- RS232/422/485 to Fieldbus
- Slave to Slave, Slave to Master conversions
- FDT/DTM Configuration Tool SYCON.net included
- Ethernet Service Port
- Can be a Master to one DeviceNet slave
£279.07
Image for illustrative purposes only
Description
The netTAP uses the netX network controller to provide a low-cost and easy solution for different protocol conversions. The different interfaces are combined in a compact housing. Firmware is loaded via Ethernet to suit the required protocol.
Specification
DeviceNet | Master 510 Byte I/O, Slave 510 Byte I/O |
---|---|
Product | NT 50-DN-RS |
Description | Gateway DeviceNet to Serial |
Display | Link, Rx/Tx, SYS, COM, Protocol specific |
Possible Implementation | DeviceNet Master (for one slave) to ASCII, Modbus RTU or DeviceNet Slave to ASCII, Modbus RTU |
Diagnostic Interface | Ethernet |
Configuration | SYCON.net |
Operating Voltage | 18 - 30 V / 130 mA at 24 V |
Plug Connector | Mini COMBICON 2-pole |
Operating Temperature | 0 - 60°C |
Dimensions (without connector) | 100 x 52 x 70 mm |
Mounting | On top-hat rail DIN EN 60715 |
Weight | 150g approx. |
CE Sign | Yes |
Emissions | CISPR 11 Class A |
Noise Immunity | EN 61131-2: 2003 |
Protocol | Cyclic Data |
ASCII | Master 2024 Byte I/O, Slave 2024 Byte I/O |
Modbus RTU | Master 11520 Byte I/O, Slave 11520 Byte I/O |
Protocols
Primary | Secondary |
---|---|
DeviceNet Master | Modbus RTU Master |
Modbus RTU Master | DeviceNet Master |
DeviceNet Slave | Modbus RTU Master |
Modbus RTU Master | DeviceNet Slave |
DeviceNet Master | Modbus RTU Slave |
Modbus RTU Slave | DeviceNet Master |
DeviceNet Slave | Modbus RTU Slave |
Modbus RTU Slave | DeviceNet Slave |
DeviceNet Master | ASCII |
ASCII | DeviceNet Master |
DeviceNet Slave | ASCII |
ASCII | DeviceNet Slave |
Accessories
Product Name | Brief Description |
---|
Downloads
- netTAP50
Product Datasheet 10-2022