Your cart is empty.
netRAPID 51 Realtime Ethernet Slave IIoT
Ready-to-solder netX Design in stamp size
- Rapid alternative to an own development
- Complete Slave interface without transformer
- Prototyping or SMD mass production
- All major network protocols as Slave, IoT ready
- Host connection via Dual-Port-Memory or SPI
- One hardware for all Real-Time Ethernet systems
- 2018: Integrated OPC UA & MQTT Client
CALL FOR PRICE
netX Chip-Carrier for integrated communication
The network technology in automation devices from medium to high volumes is typically integrated with a chip solution, such as the flexible multiprotocol chip netX. The complete development of the communication interface is thereby carried out by the customer from scratch. Low costs per unit are opposed to development risk, increased development time and necessary in-house knowledge.
The rapid and secure alternative to in-house development is netRAPID.
netX Chip-Carrier is a solution that offers adequate costs per unit as well as reduced risk and fast time-to-market. netRAPID is a complete netX-based communication interface and contains all necessary operating components. The 32 x 32 mm compact netX carrier will be soldered to the baseboard - by hand or SMD production process. You only need to add network interface, LEDs and address switches. A simple 2-layer baseboard is sufficient.
Full functionality of netRAPID is enabled via licensed firmware, which needs to be acquired once and loaded during manufacturing process.
|Dimensions (LxWxD)||32 x 32 x 4 mm|
|Operating Temperature||-20° to + 70° C|
|Communication Interface||EtherCAT, EtherNet/IP, Modbus TCP, POWERLINK, PROFINET, SERCOS, VARAN, 2x Ethernet 100 BASE-TX without transformer|
|Diagnostic interface||USB, UART RxD/TxD|
|Outputs||SYS system (RUN/RDY) / Dual colour LED yellow/green COM-Status 0/1 (COM 0/1) / Dual colour- LED red/green Ethernet Status Link and Activity (LINK RX/TX)|
|Supply Voltage||3V3 / 520 mA|
|Product||netRAPID 52 Real Time Ethernet Slave with IIoT and IT Function|
|Contacting/Pinout||76 solder contacts 1 mm with 1.5 mm grid|
|Supply voltage||3V3 / 520 mA|
|Inputs||2x4 bit coding switch for address|
|Diagnostic Interface||USB, UART RxD/TxD|
|Host interface||8-/16 bit Dual-Port-Memory / SPI mode 3, 50MHz|
|Product Name||Brief Description|
|netRAPID Development Kit||netRAPID Development Kit||view details|
Product Datasheet 09 2017