NT 151-RE-RE Gateway Protocol Converter PROFINET, EtherCAT, Ethernet/IP + Others

Gateway Real-Time Ethernet Slave to Real-Time Ethernet Slave

    • Flexible loadable for PROFINET, EtherCAT, Sercos and EtherNet/IP
    • Effortless network integration as standard I/O slave device both-ways
    • Shortest I/O data conversion time less than 10 ms
    • Secure network segregation via data buffer
    • Device replacement in seconds via memory card based loading
    • With USB diagnostic and configuration port

£594.92

Description

The gateway netTAP 151 transmits IO data bidirectionally between any two industrial Real-Time Ethernet networks. It is the ideal solution for installations with heterogenous networks or such of the same kind to exchange data across given network boundaries. With more than 25 different combinations of the protocols PROFINET, EtherCAT, EtherNet/IP, POWERLINK and Sercos, the device series provides a solution for any conversion.

The integration as simple IO device into the primary network makes the converter compatible with any common PLC. On the secondary side it works either as IO device too or controls a subordinate network as a bus master. The length of the IO data can be scaled to any application and the data in between can be mapped on byte level arbitrarily.

Secure network separation is provided by two Ethernet controllers, each connected to a Dual Ethernet port with integrated switch. That allows realizing star, ring and inline network topologies without further peripherals. Both controllers handle the protocols independent from each other and exchange only the IO data across a data buffer. An overall data processing time lower than 10 milliseconds is achieved.

The devices can be ordered preloaded with firmware and license or unloaded. Unloaded devices minimize the storage costs. Subsequent loading of a firmware configures these devices for any conversion most flexible. All devices are commissioned and diagnosed network independent over USB.

Specification

EtherCAT Master 9200 Bytes I/O Slave 512 Bytes I/O
SERCOS-III Master 11472 Bytes I/O Slave 240 Bytes I/O
Ethernet/IP Master 11472 Bytes I/O, Slave 1008 Bytes I/O
PROFINET-IO Master 11472 Bytes I/O, Slave 2048 Bytes I/O
Configuration Windows application SYCON.net Included
Operating Voltage 18 - 30 V / 190 mA at 24 V
Plug Connector MINI COMBICON, 5-pin
Operating Temperature If distance to neighboring devices is minimum 17.5 mm: -20 … +60°C; If housing has contact to neighboring device (and if surface temperature of neighboring device does not exceed +70°C): -20 … +50°C
Product NT 151-RE-RE
Mounting DIN rail EN 60715 (Top hat TS35 rail)
Weight 121g approx.
CE Sign Yes
Protocol Cyclic Data
Dimensions (without connector) 113.6 mm x 22.6 mm x 99 mm (without connector)
Description Gateway Real-Time Ethernet
Display 4 Link RJ45, 4 Act RJ45, Rx/Tx, SYS, APL, COM0, COM1, COM2, COM3 protocol specific communication status
Diagnostic Interface Mini USB, 5-pin

Protocols

Primary Secondary
EtherCAT Slave Ethernet/IP Adapter/Slave
EtherCAT Slave POWERLINK Slave
EtherCAT Slave PROFINET IO Device/Slave
EtherCAT Slave SERCOS III Slave
Ethernet/IP Adapter/Slave EtherCAT Slave
Ethernet/IP Adapter/Slave Ethernet/IP Adapter/Slave
Ethernet/IP Adapter/Slave POWERLINK Slave
Ethernet/IP Adapter/Slave SERCOS III Slave
POWERLINK Slave EtherCAT Slave
POWERLINK Slave Ethernet/IP Adapter/Slave
POWERLINK Slave POWERLINK Slave
POWERLINK Slave PROFINET IO Device/Slave
POWERLINK Slave SERCOS III Slave
PROFINET IO Device/Slave EtherCAT Slave
PROFINET IO Device/Slave Ethernet/IP Adapter/Slave
PROFINET IO Device/Slave POWERLINK Slave
PROFINET IO Device/Slave PROFINET IO Device/Slave
SERCOS III Slave EtherCAT Slave
EtherCAT Slave EtherCAT Slave
Ethernet/IP Adapter/Slave PROFINET IO Device/Slave
PROFINET IO Device/Slave SERCOS III Slave
SERCOS III Slave Ethernet/IP Adapter/Slave
SERCOS III Slave POWERLINK Slave
SERCOS III Slave PROFINET IO Device/Slave
SERCOS III Slave SERCOS III Slave

Accessories

Product Name Brief Description
SD Card SD Memory Card for netTAP view details
NXLIC-MASTER Master License view details

Downloads

Request a Quote

Basket £0.00

Your cart is empty.

Request a callback
Complete to receive a call back within one hour between 9.00 and 17.30 Monday - Friday
By submitting you agree we can store your details as per our Privacy Policy
Cookies disclaimer

I agree Our site saves small pieces of text information (cookies) on your device in order to deliver better content and for statistical purposes. You can disable the usage of cookies by changing the settings of your browser. By browsing our website without changing the browser settings you grant us permission to store that information on your device.