SSD and Flash Storage


Innodisk SSDs bring a whole new level of high-performance to memory storage. Our wide selection of SSDs are designed for different applications, including industrial/embedded, enterprise server, aerospace, defense and other semi-industrial applications, such as thin clients, POS and kiosks. Available in SLC Highest Endurance, iSLC Increased Endurance, 3D TLC and MLC types, and support PATA/IDE 44 pin (by request) and SATA III interface.

Select Item Below or Click Here for Complete List

SATA SSD Back to top


M.2-SATA (NGFF) stands for Next Generation Form Factor, which is comprised of several interfaces and the corresponding system interconnect based on 67pin edge card connectors. The Innodisk M.2-SATA (NGFF) offers wide range capacities in several standard form factors to fulfill different applications, including type 2230, 2242, 2260 & 2280.

Select Item Below or Click Here for Complete List

M.2-SATA (NGFF) Back to top


Innodisk M.2-PCIe is an NVM Express (NVMe) SSD designed as the standard M.2 form factor with PCIe interface. Supports PCIe Gen 3x2, 3x4 and 4x4 and it is compliant with NVM 1.3 providing excellent performance. Moreover, it adopts SLC, MLC and 3D TLC NAND Flash providing high endurance and reliability. With sophisticated error detection and correction (ECC) functions, the module can ensure full End-to-end Data Path Protection that secures the data transmission between host system and NAND Flash.

Select Item Below or Click Here for Complete List

M.2-PCIe NVMe Back to top


The Innodisk mSATA is a low-profile interface connector, also known as a Mini-SATA. It enables a Serial ATA to effectively integrate into a small form-factor drive, which is roughly the size of a business card. It can also be integrated into a wide variety of the hard drives and solid state drives (SSDs) used in compact devices, such as laptops, netbooks, and mobile devices. Innodisk's mSATA supports high-performance data transfer rates.

Select Item Below or Click Here for Complete List

mSATA Back to top


Innodisk's Serial ATA Disk on Module SATADOM is the world's smallest form factor with cable power or exclusive Pin 7 or pin 8 VCC built-in option, which simplifies motherboard design. With this option, since it has no external cables, it is more robust and enhances the disk functions of various industrial and enterprise applications. Innodisk's SATADOM also supports the SATA III interface with faster data transfer rates and is available in capacities ranging from 1GB up to 256GB.

Select Item Below or Click Here for Complete List

SATA DOM Back to top

CF Card

Innodisk’s Industrial CompactFlash Card (iCF) provides a high-capacity solid-state flash memory solution that electrically complies with the PCMCIA* ATA standard. Designed to replace traditional rotating disk drives, Innodisk iCFs are embedded solid-state data storage systems that are designed for mobile computing and the industrial workplace. Innodisk’s Industrial CompactFlash Cards also feature an extremely lightweight and reliable low-profile form factor.

Select Item Below or Click Here for Complete List

CF Card Back to top


The Innodisk CFast is a small form factor card standard with high data storage capacity. It is suitable for semi-industrial applications. Compliant with the CFast 2.0 standard, it is designed with a 7+17 pin connector and is SATA compatible. The Innodisk CFast offers data transfer rates of sequential read of up to 560MB/s and of sequential write up to 520MB/s.

Select Item Below or Click Here for Complete List

CFast Back to top


USB Disk Module, high performance, embedded flash disk module designed to replace a conventional IDE hard disk drive. USB SSD can be plugged into a standard Embedded USB connector commonly found in desktops, portable PC systems and industrial PC systems. USB SSD is well suited for embedded flash storage applications offering new and expanded functionality as well as more cost-effective designs, better performance and increased reliability

Select Item Below or Click Here for Complete List

USB Back to top


The Innodisk Slim SATA is compliant with the JEDEC SFF-8156 standard form factor and ATA protocol. It does not require drivers and can be configured as a boot device or a data storage device. It is also suitable for portable/hand-held devices, thin clients, and industrial applications that require the effective reduction of operation system boot time and power consumption. With a 7+15 pin SATA interface, the Innodisk SATA Slim supports most platforms with a standard SATA port.

Select Item Below or Click Here for Complete List

Slim SATA Back to top

SD microSD

Innodisk SD cards and microSD cards are single-level flash devices built for rugged applications in the embedded fields. As an industrial-grade SD/microSD card, these cards deliver outstanding performance, as well as excellent endurance and reliability, especially compared to other cards used in the mobile market. Innodisk’s SD and microSD cards are compatible with SD 2.0/SD 3.0 standards and support SDHC Class 10 (UHS-I). They also feature S.M.A.R.T. technology, which monitors the health of these SD cards.

Select Item Below or Click Here for Complete List

SD microSD Back to top

Basket £0.00

Your cart is empty.

Request a callback
Complete to receive a call back within one hour between 9.00 and 17.30 Monday - Friday
By submitting you agree we can store your details as per our Privacy Policy
Cookies disclaimer

I agree Our site saves small pieces of text information (cookies) on your device in order to deliver better content and for statistical purposes. You can disable the usage of cookies by changing the settings of your browser. By browsing our website without changing the browser settings you grant us permission to store that information on your device.